46SE/LVD Terminator for SE/LVD hard disks with SCA connector.B.4.5 ExamplesOn the following pages, are some examples of correct SCSI cabling.First of all a few general tips: All ICP Controllers have a yellow LED for each Wide/Ultra2 and Ultra 160 SCSI channel.This LED indicates the current SCSI-Mode of the corresponding channel. If the LED islit, the Wide/Ultra2 and Ultra 160 SCSI channel is operating in LVDS-Mode.If the LED is not lit, this channel is operating in SE-Mode only.(The same applies to the SCSI accessories Art.No.: 8951 and 8952. There are two LEDsindicating the current SCSI-Mode: Green=SE, Yellow=LVDS). If you want to use hot-swap shelfs for LVD disk drives, make sure that the shelf is fullyLVD compliant, especially when several shelfs are operated on one LVD channel. When-ever possible use for both, the shelf and the LVD disk drive, the SCA connector.
