ICS 695XL Operator's Manual

Also see for 695XL: Operator's manual Service manual

ICS 695XL Operator's Manual Manual pdf 41 page image

© 2018 ICS®, Blount International Inc. Specifications are subject to changewithout notice. REV01102017695XL OPERATOR MANUAL41ENGLISHTECHNICAL SPECIFICATIONSEngine Type 2-stroke, Air CooledDisplacement 94 cc (5.7 cu-in)Horsepower 4.8 kW (6.4 hp) @ 9000 rpmTorque 5.7 Nm (50.4 in-lbs) @ 7,200 rpmEngine Speed 9,300 +/- 150 rpm (max)2,700 +/- 100 rpm (idle)Chain Speed at Maximum Power 28 m/s (5500 ft/min)Weight 9.5 kg (21 lbs) powerhead onlyDimensions 46 cm (18 in) length 36 cm (14 in) height30 cm (12 in) widthAir Filter Water resistant polyesterCarburetor Walbro RWJ-7Starter Recoil, dust and water resistantIgnition Special water resistant electronic ignitionClutch Centrifugal, three shoe, three springFuel ratio 2% (50:1) gasoline-to-oilFuel Capacity 1 liter (0.26 gallon)Water Supply Requirement Minimum 1.5 bar (20 psi)Water Flow Requirement Minimum: 4lpm (1 gpm )Guaranteed Sound Power Level, Lwa (1) 115 dB(A); (Kwa=1.0 dB(A))Equivalent Sound Pressure at theOperator's Ear L pA104.6 dB(A) (K=1.0 dB(A))Vibration, a hv, eq Concrete Cutting (2) 3.6 m/s2 (K=1.0 m/s 2) Front Handle3.1 m/s2 (K=1.0 m/s 2) Rear HandleVibration, a hv, eq Pipe Cutting (2) 5.62 m/s2 (K=0.2 m/s2) Front Handle5.28 m/s2 (K=0.2 m/s2) Rear HandleEngine Break-in Period One tank, without cutting, cycling throttleSpark Plug NGK BPMR7A or Champion RCJ6YElectrode gap 0.5 mm (0.020 in)Technical Specfications