PSY1 Stem PsychrometerQuick Start GuideVersion 4.4 29/10/2014ICT InternationalEnabling better global research outcomes in soil,plant & environmental monitoring.

Quick Start Guide

PSY1 Start Up Check List

System Requirements

Power Requirements and Charging the PSY1 Internal Battery

Connecting a Power Supply to the Instrument

Connecting Power Directly via Solar Panel

Connecting Power via External 12V Battery or the ICT CH24

Connecting Power via External 12V Battery and Solar Panel

Sharing an External 12V Battery and Solar Panel via Daisy Chaining

Clean the Psychrometer Chamber

Install the PSY1 Software & USB Driver

Connect to the Instrument via USB Cable

Connect via USB Cable

Alternatively: if you are using a MCC1 Wireless Radio Modem

Instrument Information

power management

Set the Measurement Protocols

Calibrate the Psychrometer

Install the Sensor

Set the Logging Interval

Analyse Data

ICT PSY1 Quick Start Manual

PSY1

Charging the PSY1 Internal Battery

Connecting Power Directly via CH24 Power Supply

Cleaning the Psychrometer Chamber

Installing ICT Combined Instrument Software and USB Driver

Turning the Instrument On

Connecting to the Instrument

Connect via MCC Mini

Setting Measurement Parameters

Configuration

Chamber Heating

Diagnostics

SD Card Logging Options

PSY Logger Mounting and Sensor Installation

Preparing a Site

Sealing the Exposed Site

Downloading Data