ICT PSY1 Quick Start Manual
Also see for PSY1: Quick start guide
                              | |
Contents
| 
Instrument InformationOn the PSY Software, fields are given for Naming and adding a Comment,These fields are specific to the individual serial numbers of the PSY1 loggers.This naming system can be helpful for experiments, for instance naming thembased on location or purpose of the PSY1 and to tell them apart easily.Of the two fields, the Name field ties to the PSY1 serial number within the RFand USB chooser list, this makes it easier to find the logger you wish to connectto when using multiple PSY1 loggers in the field.Entering Information:1) To edit the fields the original text needs to be erased, select the X next to the field you need to clear.2) Type in the desired description – make sure to keep it short or abbreviated to a naming scheme.3) Select “Update Sensor Information” – this will save both fields into the PSY1 memory (note thiswill retain in the loggers memory regardless of SD Card present or removed.)4) For the update to be successful, you will need to power down the PSY1 for 5 minutes and thenpower it back up. To do so, remove external power to the bus plugs, disconnect in the PSY softwareand power down by the power button (hold in for 2+ seconds) or use the power down command in thePSY software – once the software disconnects remove USB cable if USB cable was used.5) When ready use the power button to turn the logger back on or alternatively power can be turned onautomatically by connecting external power and/or a USB cable.23ICT InternationalEnabling better global research outcomes in soil, plant & environmental monitoring. |
Related manuals for ICT PSY1
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine