ICU MSD-400 User Manual
                                                                 | |
Contents
| 
6-4 RECORD Setup1) RECORD SETUP To set the recorder configuration.•CHANNEL: Channels of the 4-camera groups.•QUALITY : Recording quality of the selectedchannels of 4-camera group.• FPS : Frames per secondP Al : R d d t 0 5 d b f th• Pre Alarm : Record data 0~5 seconds before thealarm occurs•*Notice : In case of sudden power off while inPre-Alarm mode, up to 5 seconds of data lossmay occur.•Click OK to save this setting.•Click DEFAULT to return to the original setting.2) MOTIONThe Menu for DVR Motion Detection Programming.•Select CHANNEL•SENSITIVITY : sensitivity LOW ~ VERY HIGH•MOTION DURATION: The time duration of motiondetection.•MASK ZONE : Click MASK ZONE to select or clearblocks.•Click OK to save this setting.•Click DEFAULT to return to the original setting3) SCHEDULEClick DEFAULT to return to the original setting.To Set the Schedule Recording Mode.•Appoint Schedule recording by Day and HourAppoint Schedule recording by Day and Hour.•MOTION, ALARM, MOTION+ALARM orCONTINUOUS recording mode selectable.Note: In case of emergency, click the Panic buttonwhich will start recording at CONTINUOUS MODEat the highest resolution. Unless otherwisespecified, it records according to this ScheduleRecord Setup.34Record Setup.•Click OK to save this setting.•Click DEFAULT to return to the original setting |
manualsdatabase
Your AI-powered manual search engine