IDEAL INDUSTRIES 61-310 Technical Manual

Contents

IDEAL INDUSTRIES 61-310 Technical Manual Manual pdf 11 page image

Form Number TM61310 Rev 2 Aug 2007Page 9Replacing FusesWarningTo avoid electrical shock, remove the test leads and any input signals before replacingbattery or fuses.theamage or injury, INSTALL ONLY quick acting fuses with the following Amp/VoltF-310 Fuse: 250mA 250V FAST BLOWFu3. Remove the two screws under the battery cover.case until the case unsnaps from the front case near display.rn the back case cover, reinsert the case screws.replace the old battery with a new battery.To prevent dcurrent interrupt rating:Fusese ReplacementThe 61-310 replacement fuse is part number: F-310Fuse Rating is: 250mA 250V FAST BLOW1. Remove the rubber holster.2. Remove the two screws on the battery cover and open the battery cover.4. Lift up on the back• Replace the defective fuse with the standard rated fuse for this meter.5. Retu• It is recommended to6. Return the battery cover and reinstall the two battery cover screws.7. Replace the rubber boot.Caution Use only a fuse with the amperage, interrupt voltage, and speed ratingspecified.CleaningWarningTo avoid electrical shock or damage to the meter, never allow water inside the case. To avoiddamaging the meter’s housing, never apply solvents to the meter.Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176FAX 781.665.0780 - TestEquipmentDepot.com