IDEAL INDUSTRIES 61-795 Technical Manual

Contents

IDEAL INDUSTRIES 61-795 Technical Manual Manual pdf 3 page image

Form number TM61795 Rev 4 July 2011Page 1IntroductionWarningTo avoid shock or injury, do not perform the verificationtests or calibration procedures described in this manualunless you are qualified to do so.The information provided in this document is for the useof qualified personnel only.CautionThe 61-795 contains parts that can be damaged by static discharge.Follow the standard practices for handling static sensitive devices.For additional information about IDEAL INDUSTRIES and its products,and services, visit IDEAL INDUSTRIES web site at:www.idealindustries.comSAFETYReview the following safety precautions to avoid injury and prevent damage to this product or any productsconnected to it. To avoid potential hazards, use the product only as specified.It is recommended that you read through the Operation or User manual before starting. Not all Caution,Warning, or Danger precautions are listed in this manual.CAUTION.These statements identify conditions or practices that could result in damage to the equipment or otherproperty.WARNING.These statements identify conditions or practices that could result in personal injury or loss of life.Specific precautionsUse proper Fuse. To avoid fire hazard, use only the fuse type and rating specified for this product.Do not operate without covers. To avoid personal injury, do not apply any voltage or current to theproduct without the covers in place.Electric overload. Never apply a voltage to a connector on the product that is outside the range specifiedfor that connector.Avoid electric shock. To avoid injury or loss of life, do not connect or disconnect probes or test leadswhile they are connected to a voltage source.Avoid electric shock. To avoid injury or loss of life, do not come in contact with tested material or probeswhile the Test Button is pressed. High Voltage potentials are present during Insulation Tests..Do not operate in wet/damp conditions. To avoid electric shock, do not operate this product in wet ordamp conditions.