IDEC MICROSmart FC6A Series User Manual
Also see for MICROSmart FC6A Series: Ladder Programming ManualUser manual
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  | |
Contents
| 
FC6A SERIES MICROS MART USER ’S M ANUAL FC9Y-B17224-154: O PERATION B ASICSStart/Stop OperationThis section describes how to run and stop the FC6A Series MICROSmart.You can start and stop FC6A Series MICROSmart operations by using WindLDR operations, FC6A Series MICROSmart operations,function switch operations, menu operations using an HMI module, by turning the FC6A Series MICROSmart on or off, or by usingthe stop/reset input function by way of external input.• For operations using WindLDR, see "Start/Stop Operation Using WindLDR" on page 4-15.• For operations using the FC6A Series MICROSmart power supply, see "Start/Stop Operation Using the Power Supply" on page4-16.• For operations using the function switch, see "Function Switch Configuration" on page 5-11.• For operations using an HMI module, see "HMI Function" on page 7-1.• For the stop input settings, see "Stop Input" on page 5-5.• For the reset input settings, see "Reset Input" on page 5-5.The switch from start to stop is performed during the END processing of the user program, and the following functions are alsostopped when the user program is stopped. For details on END processing, see the appendix "Breakdown of END Processing Time"in the "FC6A Series MICROSmart Ladder Programming Manual".High-speed counter/frequency measurement/user interrupt/catch input/timer interrupt/user communication/pulse output• You can use M8025 (Maintain Outputs While Stopped) to select whether to maintain or clear the outputs while the CPU isstopped.For details on M8025 (Maintain Outputs While Stopped), see "M8025: Maintain Outputs While Stopped" on page 6-10.• The current value of the timer instruction is reset.For details on timer instructions, see Chapter 4 "TML (1-s Timer)" in the "FC6A Series MICROSmart Ladder ProgrammingManual".Also, when you switch from stop to start, the device status is cleared or kept depending on Memory Backup in the FunctionArea Settings. For details, see "Memory Backup" on page 5-13.Start/Stop Operation Using WindLDRThe FC6A Series MICROSmart can be started and stopped using WindLDR run on a Windows computer connected to the FC6ASeries MICROSmart. When the Start button is pressed in the menu bar shown below, start control special internal relay M8000 isturned on to start the FC6A Series MICROSmart. When the Stop button is pressed, M8000 is turned off to stop the FC6A SeriesMICROSmart.1. Connect the computer to the FC6A Series MICROSmart, start WindLDR, and power up the FC6A Series MICROSmart.2. Check that a stop input is not designated using Configuration > Run/Stop Control > Stop and Reset Inputs. See "StopInput and Reset Input" on page 5-5.Note: When a stop input is designated, the FC6A Series MICROSmart cannot be started or stopped by turning start control special internal relayM8000 on or off.3. Select Online from the WindLDR menu bar.The Online tab appears.4. Click the Start button to start operation, then the start control special internal relay M8000 is turned on.Make sure of safety before starting and stopping the FC6A Series MICROSmart. Incorrect operation of the FC6A SeriesMICROSmart may cause machine damage or accidents.Caution |
Related manuals for IDEC MICROSmart FC6A Series
This manual is suitable for:
MICROSmart FC6A SeriesMICROSmart FC6A-C16K1CEMICROSmart FC6A-C16P1CEMICROSmart FC6A-C16R1AEMICROSmart FC6A-C16R1CEMICROSmart FC6A-C24K1CEMICROSmart FC6A-C24P1CEMICROSmart FC6A-C24R1AEMICROSmart FC6A-C24R1CEMICROSmart FC6A-C40K1CEMICROSmart FC6A-C40K1CEJMICROSmart FC6A-C40K1DEMICROSmart FC6A-C40K1DEJMICROSmart FC6A-C40P1CEMICROSmart FC6A-C40P1CEJMICROSmart FC6A-C40P1DEMICROSmart FC6A-C40P1DEJMICROSmart FC6A-C40R1AEMICROSmart FC6A-C40R1AEJMICROSmart FC6A-C40R1CEMICROSmart FC6A-C40R1CEJMICROSmart FC6A-C40R1DEMICROSmart FC6A-C40R1DEJMICROSmart FC6A-D16K1CEEMICROSmart FC6A-D16P1CEEMICROSmart FC6A-D16R1CEEMICROSmart FC6A-D32K3CEEMICROSmart FC6A-D32P3CEEMICROSMART FC6A-PC1MICROSMART FC6A-PC3MICROSMART FC6A-PC4MICROSMART FC6A-PN4
manualsdatabase
Your AI-powered manual search engine