IDK NJR-T01SDI Command Reference Manual

Also see for NJR-T01 SDI: User guide

IDK NJR-T01SDI Command Reference Manual Manual pdf 22 page image

NJR-T01SDI Command Guide224.5.2.3 Input settings@GAG / @SAG SDI input audio groupCommand group Group BFunction Getting SettingFormat @GAG, device, ch, reserved @SAG, device, ch, reserved, primary,secondaryReturn value @GAG, device, ch, reserved, primary,secondary@SAG, device, ch, reserved, primary,secondaryParameter device: Model“1” (fixed).ch: Channel1 to 512 = Channel 1 to Channel 512If a command is input from the RS-232C connector of NJR-T01SDI or from IP-NINJARConfigurator through LAN, the value is “1” (fixed).reserved: Reservation“1” (fixed).primary: Primary audio1 = Audio group 1 (1ch to 4ch) [Default]2 = Audio group 2 (5ch to 8ch)3 = Audio group 3 (9ch to 12ch)4 = Audio group 4 (13ch to 16ch)secondary: Secondary audio1 = Audio group 1 (1ch to 4ch)2 = Audio group 2 (5ch to 8ch) [Default]3 = Audio group 3 (9ch to 12ch)4 = Audio group 4 (13ch to 16ch)Example @GAG,1,1,1@GAG,1,1,1,1,2Getting the SDI input audio group of channel 1.Primary audio : Audio group 1Secondary audio : Audio group 2@SAG,1,1,1,3,4@SAG,1,1,1,3,4Setting the primary audio of channel 1 toaudio group 3, secondary audio to audio group 4.Completed normally.Remarks An audio group cannot be specified as both primary and secondary audio group.If setting from the RS-232C connector of the NJR-T01SDI, set the DIP switch toGroup B.