|
euroLINE 120Translation (EN) of the original instructions (DE) 7 - 48IEF-Werner GmbH | Wendelhofstraße 6 | DE-78120 Furtwangen | www.ief.deGenerated by: Reichelt Frank | MAN_EN_1131236_euroLINE120_R1d.doc1 Declaration of IncorporationEC declaration of incorporation in the sense of the EC directive 2006/42/EC (machinery), Annex II BThe manufacturer:IEF-Werner GmbHWendelhofstraße 678120 Furtwangen - Germanyhereby declares that the following products (the incomplete machine/partial machine):Designation IEF-Werner parts group numbereuroLINE 120 TG1002844where possible based on the scope of delivery, corresponds to the following basic requirements ofthe directive on Machinery (2006/42/EC):Annex I, item: 1.1.2; 1.1.3; 1.1.5; 1.3.2; 1.3.4; 1.5.1; 1.7.3; 1.7.4.The incomplete machine also corresponds to the following further directives:■ Directive 2014/30/EU of the European parliament and of the council of 26 February 2014 on theharmonisation of the laws of the Member States relating to electromagnetic compatibility■ Directive 2014/35/EU of the European parliament and of the council of 26 February 2014 on theharmonisation of the laws of the Member States relating to the making available on the marketof electrical equipment designed for use within certain voltage limits.The technical documents were generated according to Annex VII part B and may be electronicallysubmitted to the national authorities upon justified request.List of some applied harmonised standards:■ DIN EN ISO 12100-1,-2 / DIN EN ISO 13857 / DIN EN ISO 13850 / DIN EN 60204-1Commissioning of the incomplete machine delivered by us is not permitted until it has beendetermined that the overall system into which the incomplete machine is installed meets the basicsafety and health protection requirements according to Annex I of the above EC directive2006/42/EC.Name and address of the documentation officer: IEF-Werner GmbH, FurtwangenFurtwangen, August 2019 Stefan Deck (managing director)
PreviousNext |