IEI Technology AFL-17D User Manual

Also see for AFL-17D: User manual User manual

AFL-W19A/W19B/17D/W15A-GM45 Panel PCPage 37Î Auto D EFAULT BIOS auto detects the LBA mode control on the specifiedchannel.Î Block (Multi Sector Transfer) [Auto]Use the Block (Multi Sector Transfer) to disable or enable BIOS to auto detect if thedevice supports multi-sector transfers.Î Disabled BIOS is prevented from using Multi-Sector Transfer on thespecified channel. The data to and from the device occursone sector at a time.Î Auto D EFAULT BIOS auto detects Multi-Sector Transfer support on thedrive on the specified channel. If supported the datatransfer to and from the device occurs multiple sectors ata time.Î PIO Mode [Auto]Use the PIO Mode option to select the IDE PIO (Programmable I/O) mode program timingcycles between the IDE drive and the programmable IDE controller. As the PIO modeincreases, the cycle time decreases.Î Auto D EFAULT BIOS auto detects the PIO mode. Use this value if the IDE diskdrive support cannot be determined.Î 0 PIO mode 0 selected with a maximum transfer rate of 3.3 MB/sÎ 1 PIO mode 1 selected with a maximum transfer rate of 5.2 MB/sÎ 2 PIO mode 2 selected with a maximum transfer rate of 8.3 MB/sÎ 3 PIO mode 3 selected with a maximum transfer rate of 11.1 MB/sÎ 4 PIO mode 4 selected with a maximum transfer rate of 16.6 MB/s(This setting generally works with all hard disk drivesmanufactured after 1999. For other disk drives, such as IDECD-ROM drives, check the specifications of the drive.)