IEI Technology AFL-ATOM Series User Manual

Contents

AFOLUX AFL-ATOM Series Panel PCPage 54Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LANcable RJ-45 connector into the onboard RJ-45 connector. Step 0:4.11.2 Serial Device ConnectionThe AFOLUX AFL-ATOM Series has two male DB-9 connectors on the bottom panel forserial devices to be connected. Follow the steps below to connect a serial device to theAFOLUX AFL-ATOM Series panel PC.Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown inChapter 2.Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device intothe DB-9 connector on the bottom panel. See Figure 4-26.Figure 4-26: Serial Device ConnectorStep 3: Secure the connector. Secure the serial device connector to the externalinterface by tightening the two retention screws on either side of the connector.Step 0: