AFL-F08A-N270 Panel PCPage 54Î Enhanced D EFAULT Configures the on-board ATA/IDE controller to be inEnhanced mode. In this mode, IDE channels and SATAchannels are separated. This mode supports up to 6storage devices. Some legacy OS do not support thismode.Î Legacy IDE Channels [SATA Pri, PATA Sec]Î SATA Only Only the SATA drives are enabled.Î SATA Pri, PATA Sec D EFAULT The SATA drives are enabled on the primaryIDE channel, traditional IDE devices areenabled on the secondary channelÎ PATA Only Only the IDE devices are enabledÎ IDE Master and IDE SlaveWhen entering setup, BIOS auto detects the presence of IDE devices. BIOS displays thestatus of the auto detected IDE devices. The following IDE devices are detected and areshown in the IDE Configuration menu: Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE SlaveThe IDE Configuration menu allows changes to the configurations for the IDE devicesinstalled in the system. If an IDE device is detected, and one of the above listed four BIOSconfiguration options are selected, the IDE configuration options are shown.5.3.2.1 IDE Master, IDE SlaveUse the IDE Master and IDE Slave configuration menu to view both primary andsecondary IDE device details and configure the IDE devices connected to the system.Almost all settings are set to auto-detect, which will work for all modern drives.
