AFL-W15A/17D-GM45 Panel PCPage 33 Async DMA: Indicates the highest Asynchronous DMA Mode that issupported. Ultra DMA: Indicates the highest Synchronous DMA Mode that is supported. S.M.A.R.T.: Indicates whether or not the Self-Monitoring Analysis andReporting Technology protocol is supported. 32Bit Data Transfer: Enables 32-bit data transfer.Î Type [Auto]Use the Type BIOS option select the type of device the AMIBIOS attempts to boot fromafter the Power-On Self-Test (POST) is complete.Î Not Installed BIOS is prevented from searching for an IDE diskdrive on the specified channel.Î Auto D EFAULT The BIOS auto detects the IDE disk drive typeattached to the specified channel. This setting shouldbe used if an IDE hard disk drive is attached to thespecified channel.Î CD/DVD The CD/DVD option specifies that an IDE CD-ROMdrive is attached to the specified IDE channel. TheBIOS does not attempt to search for other types ofIDE disk drives on the specified channel.Î ARMD This option specifies an ATAPI Removable MediaDevice. These include, but are not limited to:ZIPLS-120Î LBA/Large Mode [Auto]Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (LogicalBlock Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, themaximum drive capacity is 137 GB.Î Disabled BIOS is prevented from using the LBA mode control onthe specified channel.
