AFL-W19A/17D/W15A-N270 Panel PCPage 50Î PATA Only Only the IDE drives are enabled. SATA drives aredisabledÎ Configure SATA as [IDE]Use the Configure SATA as option to configure SATA devices as normal IDE devices.Î IDE D EFAULT Configures SATA devices as normal IDE device.Î RAID Used when a RAID setup is installedÎ AHCI Enables advanced SATA drive features3.3.2.1 IDE Master, IDE SlaveUse the IDE Master and IDE Slave configuration menu to view both primary andsecondary IDE device details and configure the IDE devices connected to the system.BIOS SETUP UTILITYMain Advanced PCIPNP Boot Security Chipset Power ExitPrimary IDE Master⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯Device :Not Detected⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯Type [Auto]LBA/Large Mode [Auto]Block (Multi-Sector Transfer) [Auto]PIO Mode [Auto]DMA Mode [Auto]S.M.A.R.T. [Auto]32Bit Data Transfer [Enabled]Select the typeof device connectedto the systemÅ Select Screen↑ ↓ Select Item+- Change OptionF1 General HelpF10 Save and ExitESC Exitv02.61 ©Copyright 1985-2006, American Megatrends, Inc.BIOS Menu 5: IDE Master and IDE Slave ConfigurationÎ Auto-Detected Drive ParametersThe “grayed-out” items in the left frame are IDE disk drive parameters automaticallydetected from the firmware of the selected IDE disk drive. The drive parameters are listedas follows: Device: Lists the device type (e.g. hard disk, CD-ROM etc.)
