AFL2-12A-D525 Series Panel PCPage 83 IDE D EFAULT Configures SATA devices as normal IDE device. AHCI Configures SATA devices as AHCI device.6.3.4 USB ConfigurationUse the USB Configuration menu (BIOS Menu 6) to read USB configuration informationand configure the USB settings.Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.AdvancedUSB ConfigurationUSB Devices:1 Drive, 1 Keyboard, 1 HubLegacy USB Support [Enabled]Mass Storage Devices:Generic STORAGE DEVICE 9454 [Auto]Enables Legacy USBsupport. AUTO optiondisables legacy supportif no USB devices areconnected. DISABLEoption will keep USBdevices available onlyfor EFI applications.---------------------: Select Screen : Select ItemEnter Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save & ExitESC: ExitVersion 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.BIOS Menu 6: USB Configuration USB DevicesThe USB Devices Enabled field lists the USB devices that are enabled on the system Legacy USB Support [Enabled]Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboardsupport. Normally if this option is not enabled, any attached USB mouse or USB keyboarddoes not become available until a USB compatible operating system is fully booted with allUSB drivers loaded. When this option is enabled, any attached USB mouse or USB