AFL3-12A/W15A-BT Panel PCPage 103WARNING:The precautions outlined in this chapter should be strictly followed.Failure to follow these precautions may result in permanent damage tothe AFL3-12A/W15A-BT.B.1 Safety PrecautionsPlease follow the safety precautions outlined in the sections that follow:B.1.1 General Safety PrecautionsPlease ensure the following safety precautions are adhered to at all times. Follow the electrostatic precautions outlined below whenever theAFL3-12A/W15A-BT is opened. Make sure the power is turned off and the power cord is disconnectedwhenever the AFL3-12A/W15A-BT is being installed, moved or modified. Do not apply voltage levels that exceed the specified voltage range.Doing so may cause fire and/or an electrical shock. Electric shocks can occur if the AFL3-12A/W15A-BT chassis is openedwhen the AFL3-12A/W15A-BT is running. Do not drop or insert any objects into the ventilation openings of theAFL3-12A/W15A-BT. If considerable amounts of dust, water, or fluids enter theAFL3-12A/W15A-BT, turn off the power supply immediately, unplug thepower cord, and contact the AFL3-12A/W15A-BT vendor. DO NOT:o Drop the AFL3-12A/W15A-BT against a hard surface.o Strike or exert excessive force onto the LCD panel.o Touch any of the LCD panels with a sharp objecto In a site where the ambient temperature exceeds the rated temperature
