AFOLUX 915 Series Flat Panel PCPage 86Î Temperature 1 Limit of Start [020]WARNING:Setting this value too high may cause the fan to start only when theCPU is at a high temperature and therefore cause the system to bedamaged.The CPU Temp. Limit of Start option can only be set if the CPU FAN Mode Settingoption is set to Automatic Mode. Use the CPU Temp. Limit of Start option to select theCPU temperature at which the cooling fan should automatically turn on. When the fanstarts, it rotates using the starting pulse width modulation (PWM) specified in the Fan 3Start PWM option below. To select a value, select the CPU Temp. Limit of Start optionand enter a decimal number between 000 and 127. The temperature range is specifiedbelow. Minimum Value: 0°C Maximum Value: 127°CÎ Fan 1 Start PWM [070]The Fan 3 Start PWM option can only be set if the CPU FAN Mode Setting option is setto Automatic Mode. Use the Fan 3 Start PWM option to select the PWM mode the fanstarts to rotate with after the temperature specified in the Temperature 3 Limit of Start isexceeded. The Super I/O chipset supports 128 PWM modes. To select a value, select theFan 3 Start PWM option and enter a decimal number between 000 and 127. Thetemperature range is specified below. PWM Minimum Mode: 0 PWM Maximum Mode: 127
