IEI Technology ECK-3692 User Manual

IEI Technology ECK-3692 User Manual Manual pdf 52 page image

ECK-3692G Embedded SystemPage 364.1 Anti-static PrecautionsWARNING:If the following anti-static precautions are not followed, a user may beinjured and the system irreparably damaged.Electrostatic discharge (ESD) can cause serious damage to electronic components,including the PWI-9451 motherboard and the power module. (Dry climates are especiallysusceptible to ESD.) It is therefore critical that whenever the ECK-3692G is opened andany electrical component handled, the following anti-static precautions are strictly adheredto. Wear an anti-static wristband: Wearing a simple anti-static wristband canhelp to prevent ESD from damaging the board. Self-grounding: Before handling the board, touch any grounded conductingmaterial. During the time the board is handled, frequently touch anyconducting materials that are connected to the ground.4.2 Installation Procedure4.2.1 Installation Procedure OverviewTo properly install the ECK-3692G, the following steps must be followed. Detaileddescriptions of these instructions are listed in the sections that follow.Step 1: UnpackingStep 2: Configure the jumper settingsStep 3: Install the HDDStep 4: Install the four foot padsStep 5: Connect the rear panel peripheral connectors