ECN-581A-QM57 Multimedia BoxPage 414.3.5 Super IO ConfigurationUse the Super IO Configuration menu (BIOS Menu 7) to set or change theconfigurations for the FDD controllers, parallel ports and serial ports.Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc.AdvancedSuper IO ConfigurationSuper IO Chip Fintek F81801> Serial Port 0 Configuration> Serial Port 1 ConfigurationSet Parameters of SerialPort 0 (COMA)---------------------ÅÆ: Select Screen↑ ↓: Select ItemEnter SelectF1 General HelpF2 Previous ValuesF3 OptimizedDefaultsF4 SaveESC ExitVersion 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.BIOS Menu 7: Super IO Configuration4.3.5.1 Serial Port n ConfigurationUse the Serial Port n Configuration menu (BIOS Menu 8) to configure the serial port n.Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc.AdvancedSerial Port 0 ConfigurationSerial Port [Enabled]Device Settings IO=3F8h; IRQ=4Change Settings [Auto]Enable or Disable SerialPort (COM)---------------------ÅÆ: Select Screen↑ ↓: Select ItemEnter SelectF1 General HelpF2 Previous ValuesF3 OptimizedDefaultsF4 SaveESC ExitVersion 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.BIOS Menu 8: Serial Port n Configuration Menu
