ECW-281BB6 Embedded SystemWARNING:Take Anti-Static precautions whenever maintenance is being carried out on thesystem components. Failure to take anti-static precautions can causepermanent system damage. For more details on anti-static precautions, pleaserefer to Section 4.1.7.1 ECW-281BB6 System Maintenance OverviewNOTE:When doing maintenance operations on the system, please follow theinstructions in this chapter. Failure to follow these instructions may lead topersonal injury and system damage.To preserve the working integrity of the ECW-281BB6 embedded system, the systemmust be properly maintained. If embedded system components need replacement, theproper maintenance procedures must be followed to ensure the system can continue tooperate normally.7.2 System TroubleshootingThis section provides some simple troubleshooting suggestions.7.2.1 The System Doesn’t Turn OnIf after turning the system on, there is no power (indicated by the power button on the frontpanel not turning on) please do the following:Step 6: Check that the power cable connector is properly connected to the terminalblock or power socket on the system front panel.Step 7: Check that the power cable connector is properly plugged into the power source.Page 136
