IEI Technology HDC-502E User Manual

IEI Technology HDC-502E User Manual Manual pdf 20 page image

HDC-502E Video Capture CardPage 133.1 OverviewA CD is shipped with the video capture card. The CD contains a driver for the videocapture controllers on the card. When the video capture card is installed on the system,the driver must be installed. Failure to install the driver means that the video capture cardcannot be detected by the system.NOTE:The Found New Hardware Wizard will automatically start when thesystem detects the video capture card. Click Cancel to exit the wizardand follow the steps described in this chapter to install the driver andthe HDCapture demo program.3.2 Driver InstallationTo install the HDC-502E driver, please follow the steps below. If the HDC-502E driver isalready installed, please refer to Section 3.2.2 to uninstall the driver first.NOTE:If the User Access Control dialog box appears during installation,click Yes to continue.Step 1: Make sure to log in the system as the administrator.Step 2: Insert the driver CD.Step 3: Locate the “Driverinstaller.bat” file in the driver CD. Double click it. The consolewindow appears and starts to install all drivers.Step 4: The screen in Figure 3-1 appears. Click Install.