IMB-H810-i2 microATX MotherboardPage 1025.4.1 PCH-IO ConfigurationUse the PCH-IO Configuration menu (BIOS Menu 19) to configure the PCH chipset.Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.ChipsetAuto Power Button Status [Disabled (ATX)]Restore AC Power Loss [Last State]> PCI Express Configuration> PCH Azalia ConfigurationPower Saving Function(ERP) [Disabled]PCIEX16 Power [1 x16 PCIE]USB SW1 Power [+5V DUAL]USB SW2 Power [+5V DUAL]Select AC power statewhen power is re-appliedafter a power failure.---------------------: Select Screen : Select ItemEnter Select+ - Change Opt.F1 General HelpF2 Previous ValuesF3 Optimized DefaultsF4 Save & ExitESC ExitVersion 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.BIOS Menu 19: PCH-IO Configuration Restore on AC Power Loss [Last State]Use the Restore on AC Power Loss BIOS option to specify what state the systemreturns to if there is a sudden loss of power to the system. Power Off The system remains turned off Power On The system turns on Last State D EFAULT The system returns to its previous state. If it was on, itturns itself on. If it was off, it remains off. Power Saving Function [Disabled]Use the Power Saving Function BIOS option to enable or reduce power consumption inthe S5 state. When enabled, the system can only be powered-up using the power button. Disabled D EFAULT Power Saving Function support disabled
