IMBA-9454B ATX MotherboardPage 183.1 Anti-static PrecautionsWARNING:Failure to take ESD precautions during the installation of theIMBA-9454B may result in permanent damage to the IMBA-9454B andsevere injury to the user.Electrostatic discharge (ESD) can cause serious damage to electronic components,including the IMBA-9454B. Dry climates are especially susceptible to ESD. It is critical thatthe following anti-static precautions are strictly adhered to whenever handling theIMBA-9454B or any other electrical component. Wear an anti-static wristband - Wearing a simple anti-static wristband canhelp to prevent ESD from damaging the IMBA-9454B. Self-grounding - Touch a grounded conducting material before handling andperiodically while handling the IMBA-9454B. Use an anti-static pad - When configuring the IMBA-9454B, place it on anantic-static pad to reduce the possibility of ESD damage. Only handle the edges of the IMBA-9454B - When handling theIMBA-9454B, hold it by its edges.3.2 Unpacking3.2.1 Unpacking PrecautionsWhen the IMBA-9454B is unpacked, please do the following: Follow the anti-static precautions outlined in Section 3.1. Make sure the packing box is facing upwards so the IMBA-9454B does not fallout of the box. Make sure all the components shown in Section 3.3 are present.