IMBA-H610 ATX MotherboardPage 76keyboard can control the system even when there is no USB driver loaded onto thesystem.Î Enabled D EFAULT Legacy USB support enabledÎ Disabled Legacy USB support disabled5.3.7 Super IO ConfigurationUse the Super IO Configuration menu (BIOS Menu 10) to set or change theconfigurations for the FDD controllers, parallel ports and serial ports.Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.AdvancedSuper IO ConfigurationSuper IO Chip Fintek F81866> Serial Port 1 Configuration> Serial Port 2 Configuration> Serial Port 3 Configuration> Serial Port 4 Configuration> Serial Port 5 Configuration> Serial Port 6 ConfigurationPower Saving Function [Disabled]Set Parameters of SerialPort 1 (COMA)---------------------ÅÆ: Select Screen↑ ↓: Select ItemEnter Select+ - Change Opt.F1 General HelpF2 Previous ValuesF3 Optimized DefaultsF4 Save & ExitESC ExitVersion 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.BIOS Menu 10: Super IO ConfigurationÎ Power Saving Function [Disabled]Use the Power Saving Function BIOS option to enable or reduce power consumption inthe S5 state. When enabled, the system can only be powered-up using the power button.Î Disabled D EFAULT Power saving function support disabledÎ Enabled Power saving function support enabled
