IEI Technology IMBA-Q170-i2 User Manual

Contents

IMBA-Q170-i2 ATX MotherboardPage 764.11.3 Switching BIOSThe IMBA-Q170-i2 equips with dual BIOS to support flexible I/O configuration. To switchBIOS1 to BIOS2 or BIOS2 to BIOS1 successfully, please follow the steps below and referto Figure 4-18 and Table 4-2 for the BIOS switch location and settings.Step 1: Unplug the system power cord.Step 2: Switch BIOS1 to BIOS2 or BIOS2 to BIOS1 by moving the BIOS switch toBIOS1 or BIOS2 position as shown in Figure 4-18.Step 3: Remove the on-board battery, and then reinstall it.Step 4: Clear CMOS by pressing the clear CMOS button for three seconds or more.Step 5: Perform the system booting. Step 0:NOTE:The user can check which BIOS is being used from the BIOS Numberitem in the Main BIOS menu (BIOS Menu 1).Figure 4-18: BIOS1/BIOS2 Switch LocationSetting Description1-2 BIOS1 (default)2-3 BIOS2Table 4-2: BIOS1/BIOS2 Switch Settings