IEI Technology IMBA-Q670 User Manual

Also see for IMBA-Q670: Quick installation guide User manual User manual

Contents

IMBA-Q670 ATX MotherboardPage 60Figure 4-10: Wake-on LAN Connector Pinout Locations4.4 Internal Peripheral Device ConnectionsThis section outlines the installation of peripheral devices to the onboard connectors.4.4.1 SATA Drive ConnectionThe IMBA-Q670 is shipped with four SATA drive cables. To connect the SATA drives tothe connectors, please follow the steps below.Step 1: Locate the connectors. The locations of the SATA drive connectors are shownin Chapter 3.Step 2: Insert the cable connector. Press the clip on the connector at the end of theSATA cable and insert the cable connector into the on-board SATA driveconnector. See Figure 4-11.