IQ7 Design GuidePage 98Î Disabled The console is not redirected after POSTÎ Boot Loader Redirection is active during POST and during BootLoaderÎ Always D EFAULT Redirection is always active (Some OSes may notwork if set to Always) Terminal Type [ANSI]Use the Terminal Type BIOS option to specify the remote terminal type.Î ANSI D EFAULT The target terminal type is ANSIÎ VT100 The target terminal type is VT100Î VT-UTF8 The target terminal type is VT-UTF86.3.8 USB ConfigurationUse the USB Configuration menu (BIOS Menu 13) to read USB configuration informationand configure the USB settings.BIOS SETUP UTILITYMain Advanced PCIPNP Boot Security Chipset ExitUSB Configuration⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯Module Version – 2.24.3-13.4USB Devices Enabled:1 Keyboard, 1 MouseUSB Function [Enabled]USB 2.0 Controller [Enabled]Legacy USB Support [Enabled]USB 2.0 Controller Mode [HiSpeed]> USB Mass Storage Device ConfigurationOptionsDisabled8 USB PortsEnabledÅÆ Select Screen↑ ↓ Select ItemEnter Go to SubScreenF1 General HelpF10 Save and ExitESC Exitv02.61 ©Copyright 1985-2006, American Megatrends, Inc.BIOS Menu 13: USB Configuration
