IVCE-C608/IVCE-C604/IVCME-C604 Capture CardPage 4 Green: self-defined Red: self-defined4.1.1.4 IVCE-C608 Reset Input Connector (CN4)Use the reset input connector (CN4) to connect to the reset button of the system chassisto enable the multiple card cascade reset function. Pinouts for the connector are shown inTable 4-2.Pin No. Signal1 Reset input2 GNDTable 4-2: IVCE-C608 Reset Input Connector Pinouts4.1.1.5 IVCE-C608 Reset Output Connector (CN5)Use the reset output connector (CN5) to connect to the reset connector on themotherboard to enable the multiple card cascade reset function. Pinouts for the connectorare shown in Table 4-3.Pin No. Signal1 Reset output2 GNDTable 4-3: IVCE-C608 Reset Output Connector Pinouts4.1.1.6 IVCE-C608 Video/Audio Input/Output Connector (J1)Compatible cameras connect to the IVCE-C608 through the DB-26 female connector (viathe D-SUB to BNC and RCA cable). Pinouts for the connector are shown in Table 4-4.Pin No. Signal Pin No. Signal1 Video In CH1 2 Video In CH23 Video In CH3 4 Video In CH45 Video In CH5 6 Video In CH67 Video In CH7 8 Video In CH89 Video Output 1 10 NC
