NANO-QM770 EPIC SBCPage 88Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.ChipsetGraphics ConfigurationIGFX VBIOS Version 2132Igfx Frequency 350 MHzPrimary Display [IGFX]PEG0 – Gen X [Gen1]DVMT Pre-Allocated [128M]DVMT Total Gfx Mem [MAX]Primary IGFX Boot Display [VBIOS Default]LCD Panel Type [By Hardware]Backlight Control [Inverted]Select which ofIGFX/PEG/PCI Graphicsdevice should be PrimaryDisplay Or select SG forSwitchable Gfx.----------------------ÅÆ: Select Screen↑ ↓: Select ItemEnter SelectF1 General HelpF2 Previous ValuesF3 OptimizedDefaultsF4 SaveESC ExitVersion 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.BIOS Menu 21: Graphics ConfigurationÎ Primary Display [IGFX]Use the Primary Display option to select the primary graphics controller the system uses.The following options are available: IGFX Default PEGÎ PEG0 – Gen X [Gen1]Use the PEG0 – Gen X option to configure PEG0 B0:D1:F0. The following options areavailable: Gen1 Default Gen2 Gen3Î DVMT Pre-Allocated [128MB]Use the DVMT Pre-Allocated option to set the amount of system memory allocated to theintegrated graphics processor when the system boots. The system memory allocated can