PICOe-9452 Half-size CPU CardPage 965.6.3 5.1 Channel Audio Kit InstallationNOTE:This is an optional item that must be ordered separately. For furtherinformation please contact the nearest PICOe-9452 distributor, reselleror vendor or contact an iEi sales representative directly. Send anyqueries to sales@iei.com.tw.The optional 5.1 channel audio kit connects to the 10-pin audio connector on thePICOe-9452. The audio kit consists of three audio jacks. One audio jack, Mic In, connectsto a microphone. The remaining two audio jacks, Line-In and Line-Out, connect to twospeakers. To install the audio kit, please refer to the steps below:Step 1: Connect the audio kit cable. The audio kit is shipped with a cable thatconnects the audio kit to the PICOe-9452. Connect the cable to the connectoron the back of the audio kit. Make sure the pins are properly aligned (i.e. pin 1connects to pin 1).Step 2: Locate the audio connector. The location of the 10-pin audio connector isshown in Chapter 3.Step 3: Align pin 1. Align pin 1 on the onboard connector with pin 1 on the audio kitcable connector. Pin 1 on the audio kit cable connector is indicated with a whitedot. See Figure 5-14.
