IEI Technology Picoe-PV-D4251 User Manual

Also see for Picoe-PV-D4251: Quick installation guide

Contents

PICOe-PV-D4251/N4551/D5251 User ManualPage 104NOTE:Installing unsupported OS versions may cause the recovery tool to fail.B.2 Setup Procedure for WindowsPrior to using the recovery tool to backup or restore Windows system, a few setupprocedures are required.Step 1: Hardware and BIOS setup (see Section 7 7 B.2.1)Step 2: Create partitions (see Section 7 7 B.2.2)Step 3: Install operating system, drivers and system applications (see Section 7 7 B.2.3)Step 4: Build-up recovery partition (see Section 7 7 B.2.4)Step 5: Create factory default image (see Section 7 7 B.2.5) Step0:The detailed descriptions are described in the following sections.NOTE:The setup procedures described below are for Microsoft Windowsoperating system users. For Linux system, most setup procedures arethe same with Microsoft Windows except for several steps which isdescribed in Section 7 7 B.3.B.2.1 Hardware and BIOS SetupStep 1: Make sure the system is powered off and unplugged.Step 2: Install a hard drive or SSD in the system. An unformatted and unpartitioned diskis recommended.Step 3: Connect an optical disk drive to the system and insert the recovery CD.