TANK-101B/BW Embedded SystemPage 75Step 12: The recovery tool main menu window is shown as below. Press any key toreboot the system. Step0:Figure A-21: Press Any Key to ContinueA.3 Auto Recovery Setup ProcedureThe auto recovery function allows a system to automatically restore from the factorydefault image after encountering a Blue Screen of Death (BSoD) or a hang for around 10minutes. To use the auto recovery function, follow the steps described in the followingsections.CAUTION:The setup procedure may include a step to create a factory defaultimage. It is suggested to configure the system to a factory defaultenvironment before the configuration, including driver and applicationinstallations.Step 1: Follow the steps described in Section A.2.1 ~ Section A.2.3 to setup BIOS,create partitions and install operating system.Step 2: Install the auto recovery utility into the system by double clicking theUtility/AUTORECOVERY-SETUP.exe in the One Key Recovery CD. This utilityMUST be installed in the system, otherwise, the system will automaticallyrestore from the factory default image every ten (10) minutes.
