WAFER-AL SBCPage 93Aptio Setup Utility – Copyright (C) 2017 American Megatrends, Inc.ChipsetIGD ConfigurationPrimary Display [IGD]Integrated Graphics Device [Enable]DVMT Pre-Allocated [256M]DVMT Total Gfx Mem [MAX]Primary IGFX Boot Display [Auto]Select which of IGD/PCIGraphics device shouldbe Primary Display.---------------------: Select Screen↑ ↓: Select ItemEnter Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save & ExitESC: ExitVersion 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.BIOS Menu 18: Intel IGD Configuration Primary Display [IGD]Use the Primary Display option to select the graphics controller used as the primary bootdevice. Select either an integrated graphics controller (IGD) or a PCI express (PEG)controller. Configuration options are listed below: IGD D EFAULT PCIe Integrated Graphics Device [Enable]Use the Integrated Graphics Device option enables or disables Integrated GraphicsDevice (IGD). Disable Always disable IGD. Enable D EFAULT Enabled Integrated Graphics Device (IGD) whenselected as the Primary Video Adaptor. DVMT Pre-Allocated [256MB]Use the DVMT Pre-Allocated option to set the amount of system memory allocated to theintegrated graphics processor when the system boots. The system memory allocated can
