WAFER-BTP a g e 595.1 In tro d u c tio nThe BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes tocertain system settings. This chapter outlines the options that can be changed.NOTE:Some of the BIOS options may vary throughout the life cycle of theproduct and are subject to change without prior notice.5.1.1 Sta rtin g S e tu pThe UEFI BIOS is activated when the computer is turned on. The setup program can beactivated in one of two ways.1. Press the D ELETE or F2 key as soon as the system is turned on or2. Press the D ELETE or F2 key when the “Press Del to enter SETUP” messageappears on the screen. 0.If the message disappears before the D ELETE or F2 key is pressed, restart the computerand try again.5.1.2 Us in g S e tu pUse the arrow keys to highlight items, press E NTER to select, use the PageUp andPageDown keys to change entries, press F1 for help and press ESC to quit. Navigationkeys are shown in.Ke y Fu n c tio nUp arrow Move to previous itemDown arrow Move to next itemLeft arrow Move to the item on the left hand sideRight arrow Move to the item on the right hand side+ Increase the numeric value or make changes
