Page 193WAFER-LXconnected disk drives has been selected. Follow the same method to selectanother member drive.Step 3:Step 4:Confirm. The Create RAID 0 (Y/N) confirm box appears. Press Y.Name the array. Enter a nickname for the created array. Upper and lower casealphabetic, numeric, space, and underscore characters are all applicable fornaming an array Step 0:NOTE:To reduce the chance of losing data, ALi imposes certain limitations on theRAID configuration options. Parallel-ATA drives connected on the same IDEchannel cannot be selected as the members of a RAID1 array. Avoid mixingParallel-ATA and Serial-ATA disk drives in a RAID1 array.A.4.4 Stripe SizeChanging the stripe size effects RAID 0 arrays. Configurable options are: 64K (default) 32K 16K 8K 4KSelect a small stripe size if the I/Os to the hard drives are small and occur randomly.Choose a larger stripe size if the I/Os are mostly large and come in sequential orders, e.g.,A/V playback and editing applications. The default value should be appropriate for mostapplications.A.4.5 Delete RAID Setting & PartitionWARNING!If a RAID configuration is deleted, all data previously stored on the member
