WAFER-LX3 3.5" MotherboardPage 123Î Enabled D EFAULT OEM Logo displayed instead of POST messagesÎ AddOn ROM Display Mode [Force BIOS]The AddOn ROM Display Mode option allows add-on ROM (read-only memory)messages to be displayed.Î Force BIOS D EFAULT Allows the computer system to force a third partyBIOS to display during system boot.Î Keep Current Allows the computer system to display theinformation during system boot.Î Bootup Num-Lock [Off]The Bootup Num-Lock BIOS option allows the Number Lock setting to be modifiedduring boot up.Î Off D EFAULT Does not enable the keyboard Number Lock automatically. Touse the 10-keys on the keyboard, press the Number Lock keylocated on the upper left-hand corner of the 10-key pad. TheNumber Lock LED on the keyboard lights up when the NumberLock is engaged.Î On Allows the Number Lock on the keyboard to be enabledautomatically when the computer system boots up. This allowsthe immediate use of the 10-key numeric keypad located onthe right side of the keyboard. To confirm this, the NumberLock LED light on the keyboard is lit.6.5.2 Boot Device PriorityUse the Boot Device Priority menu (9 BIOS Menu 18) to specify the boot sequence fromthe available devices. The following options are available: 1 st Boot Device 2 nd Boot Device 3 rd Boot Device
