WAFER-LX3 3.5” MotherboardPage 21 I/O companion SUSP#/SUSPA# power controls Lower power I/O Wakeup on SMI/INTR2.3.7 GeodeLink™ Interface UnitA proprietary GeodeLink™ interface connects the AMD Geode™ LX 800 to the AMDGeode™ CS5536 system chipset. Some of the features of the GeodeLink™ interfaceare listed below. 64-bit, 66MHz operation PCI VSM (Virtual System Module) that makes the interface transparent toapplications software and BIOS Programmable routing descriptors, use and activity monitors, and SSMI(Synchronous System Management Interrupt)2.4 AMD® Geode™ CS5536 System ChipsetThe WAFER-LX3 series motherboards all have a preinstalled AMD® Geode™ CS5536system chipset. The system chipset features are listed below. 82xx Legacy Devices System Management Bus (SMB) Controller 8 Multi-Function General Purpose Timers (MFGPTs) Power Management Controller ACPI v2.0 compliant2.4.1 AMD® Geode™ CS5536 ATA-6 ControllerThe single 44-pin WAFER-LX3 IDE connector supports two ATA-6 HDDs. An ATA-6 (UltraATA/100) compliant IDE controller on the AMD® Geode™ CS5536 has a maximumtransfer rate of 100MB/s. ATA-6 includes advancements in error checking and ATA-6drives are compatible with future interface additions. The IDE connector is shown inFigure 2-8 below.
