WSB-H810 PICMG 1.0 CPU CardPage 92Î IO=278h;IRQ=5, 7Parallel Port I/O port address is 278h and theinterrupt address is IRQ5, 7Î IO=3BCh;IRQ=5, 7Parallel Port I/O port address is 3BCh and theinterrupt address is IRQ5, 7Î Device Mode [STD Printer Mode]Use the Device Mode option to select the mode the parallel port operates in.Configuration options are listed below. STD Printer Mode Default SPP Mode EPP-1.9 and SPP Mode EPP-1.7 and SPP Mode ECP Mode ECP and EPP 1.9 Mode ECP and EPP 1.7 Mode5.3.8 iWDD H/W MonitorThe iWDD H/W Monitor menu (BIOS Menu 13) contains the fan configuration submenuand displays operating temperature, fan speeds and system voltages.Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.AdvancedPC Health Status> Smart Fan Mode ConfigurationCPU temperature :+44ºCSystem temperature :+34ºCCPU_FAN1 Speed :1883 RPMSYS_FAN1 Speed :N/ACPU_CORE :+1.746 V+5V :+5.131 V+12V :+11.903 VDDR :+1.513 V+5VSB :+4.991 V+3.3V :+3.296 V+3.3VSB :+3.306 VSmart Fan Mode Select---------------------ÆÅ: Select Screen↑ ↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save & ExitESC: ExitVersion 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.BIOS Menu 13: iWDD H/W Monitor
