WSB-Q354 PICMG 1.0 CPU CardPage 242.7.3.1 Super I/O LPC InterfaceThe LPC interface on the Super I/O complies with the Intel® Low Pin Count SpecificationRev. 1.0. The LPC interface supports both LDRQ# and SERIRQ protocols as well as PCIPME# interfaces.2.7.3.2 Super I/O 16C550 UARTsThe onboard Super I/O has two integrated 16C550 UARTs that can support the following: one standard serial port (COM1 and COM2) IrDa 1.0 and ASKIR protocols(IR1)2.7.3.3 Super I/O Enhanced Hardware MonitorThe Super I/O Enhanced Hardware Monitor monitors three thermal inputs, VBATinternally, and eight voltage monitor inputs. These hardware parameters are reported inthe BIOS and can be read from the BIOS Hardware Health Configuration menu.2.7.3.4 Super I/O Floppy Disk Drive (FDD) ControllerThe Super I/O FDD controller is compatible with the following specifications. Enhanced digital data separator Supports automatic write protection via software Supported capacities:o 360Ko 720Ko 1.2Mo 1.44Mo 2.88M 3-mode FDD supportedThe FDD controller is interfaced to a FDD connected to the FDD connector on theWSB-Q354.
