uIB X-210-C V-N2600 E mbedded S ys temP age 133.1 Ins tallation P rec autionsDuring installation, be aware of the precautions below: Read the user manual: The user manual provides a complete description ofthe uIBX-210-CV-N2600, installation instructions and configuration options. DANGER! Disconnect Power: Power to the uIBX-210-CV-N2600 must bedisconnected during the installation process, or before any attempt is made toaccess the rear panel. Electric shock and personal injury might occur if therear panel of the uIBX-210-CV-N2600 is opened while the power cord is stillconnected to an electrical outlet. Qualified Personnel: The uIBX-210-CV-N2600 must be installed andoperated only by trained and qualified personnel. Maintenance, upgrades, orrepairs may only be carried out by qualified personnel who are familiar withthe associated dangers. Grounding: The uIBX-210-CV-N2600 should be properly grounded. Thevoltage feeds must not be overloaded. Adjust the cabling and provide externalovercharge protection per the electrical values indicated on the label attachedto the back of the uIBX-210-CV-N2600.3.2 Ins tallation and C onfiguration S tepsThe following installation steps must be followed.S tep 1: Unpack the uIBX-210-CV-N2600.S tep 2: Configure the system.S tep 3: Connect peripheral devices to the uIBX-210-CV-N2600.S tep 4: Mount the uIBX-210-CV-N2600. S tep 0:3.3 Wi-F i Antenna Ins tallation (Wi-F i Model Only)To install the Wi-Fi antennas to the uIBX-210-CV-N2600 series for efficient wirelessnetwork transmission, follow the steps below.S tep 1: Locate the antenna connectors on the rear panel of the embedded system.
