IES Quicksilver Owner's Manual
                   | |
OOWWNNEERR’’SS MMAANNUUAALL –– IIEESS QQUUIICCKKSSIILLVVEERROPERATIONAL INSTRUCTIONSBefore You RideMake sure all of your quick releases are locked and secure. Make sure all parts,components and accessories are in good working order. Check all fittings andbe sure that they are tight and secure. Inspect your bike completely.BICYCLE COMPONENTSWheelsWheels should be centered in fork or dropouts. Whenever you hear anyirregular noise from the wheels or the brakes, the wheels should be checked andrepaired. Wheels should be checked regularly for spoke tightness and rimalignment. Wheels should rotate smoothly without wobbling from side to side.Check the bearing play of the hubs by lifting the bicycle and spinning the wheel.The wheel should continue to spin for several turns and finally cease spinning.To check the play of the hubs, try to move the rim from side to side between theforks. During this test, no substantial play should exist. If you detect play or ifthe wheel is difficult to turn, the hub bearings must be adjusted.Please contact a local bicycle dealer to have the hub bearings adjusted, or callour service department LEVT at 1-(866) 742-6274.RimsThe tires must be smooth and without cracks, breaks or bulges.SpokesCheck spoke tension regularly. Approximately the same tension should beapplied to all spokes. If there is minor loosening of the spokes, you may tightenthe nipples, but it is recommended that you take the bicycle to a bicyclemechanic. If you detect a loose spoke or if the rim has a side play of more than4mm (1/8 inch), immediately have the wheel trued by a bicycle mechanic.RIDING WITH LOOSE SPOKES MAY CAUSE THE WHEEL TO FAIL.IINNTTEERRNNAATTIIOONNAALL EECCOOLLOOGGIICCAALL SSYYSSTTEEMM,, LLTTDD.. 11--886666--774422--66227744 PPaaggee 1100 ooff 1199 |
Related manuals for IES IES Quicksilver
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine