IFM Efector 300 SL5204 Installation Instructions Manual

Contents

electrical connection

IFM Efector 300 SL5204 Installation Instructions Manual Manual pdf 3 page image

3UKAlign the unit in the airflow; the arrow on the cap must point in the direction of flow.arrow(must be on the top)LEDarrowLEDTo avoid malfunction a minimumdistance between the air flow monitorand bends, valves or such like must beobserved.min.5 x Dmin.3 x DD3 Electrical connectionThe unit must only be connected by an electrician.The national and international regulations for the installation of electricalequipment must be observed.Voltage supply for units up to 60V to EN50178, SELV, PELV.► Disconnect power.► Connect the unit as follows:Core colours: BN = brown, BK = black, WH =white, BU = blue.LL+BKBUWHBN+4 OperationCheck the safe functioning of the unit.The green LED lights when the supply voltage has been applied.The unit is ready for operation approx. 90s after application of the supply voltage.

/ 3

Related manuals for IFM Efector 300 SL5204