IFYIL CRYSTAL User Manual
                                                                                    | |
Contents
| 
48O - Close| - OpenIf the stove is installed next to flammable wall, isolation for thewall should be done.• If the base where the stove is to be installed is made of flammable materials. Ifthe stove is put on flammable material, suitable isolation must be done.• Please keep away heat sensitive materials from stove (flammable, explosiveetc.).4.2. Electrical ConnectionsFirst insert the power cable into the back of the stove, then insert thecable outlet. Opening the back of the stove on / off switch to turn on yourstove, bringing the open position.A voltage regulator using is required in areas with voltageirregularities. Electronic and electronic cardfailures that may occur due to the absence of avoltage regulator are not covered by thewarranty.Use your stove and running in a socket with ground.4.3. Ventilation And Air Flow• In the room where the stove is installed, there should be enough air to allowregular combustion.• The location of stove fresh air inlet must be provided.• It is recommended that the stove should be connected to an environment(external environment) where the air suction pipe can be continuously flowingclean air with hermetic pipe.• Use 300 cm² lower, 200 cm² upper orifice. These grilles should never beclosed. Otherwise, it presents a great danger. |
Related manuals for IFYIL CRYSTAL
manualsdatabase
Your AI-powered manual search engine