IK ILOUD MICRO MONITOR User Manual
                                 | |
English17TroubleshootingI have connected my device to iLoud Micro Monitor, but no sound comes out.Make sure to set up the volume with the volume potentiometer on iLoud Micro Monitor and/or with yourdevice’s volume control.Sound is distorted.When a noticeable distortion occurs, please turn down the level of the speakers, or of the connected audiosource.Specifications- Type: 2-way active, bi-amped, studio monitor- Frequency response (-3dB): 55Hz - 20kHz- Frequency response (-10dB): 45 Hz - 22 kHz- Crossover Frequency: 3kHz- Tweeter: 3/4” silk dome and neodymium magnet- Woofer: 3” paper cone- Maximum SPL @ 50cm (with two speakers playing, averaged sinewave from 100 Hz to 10 kHz): 107dB- Number of amplifiers: 4- Amplifiers type: Class-D- Total output power (both speakers): 70W (peak) - 50W RMS- Woofer output power (single speaker): 18W RMS- Tweeter output power (single speaker): 7W RMS- Acoustic settings: high shelf (0dB or -3dB from 4kHz up); low shelf (0dB or -3dB from 250Hz down); desktop(+3.5dB between 1kHz and 10kHz and -1dB below 400Hz)- High performance Bass-Reflex port- Bluetooth® compatible with A2DP protocol- 56-bit DSP internal resolution- System total latency (analog input): 1.02 ms- System total latency (Bluetooth input): 155 ms (depends on host implementation, tested on iPhone 6S / iOS10.0.1)- Connectors: 2x RCA unbalanced input; 1/8” AUX stereo input (unbalanced); 4-pin speakers connector- Dimensions (inches): 180mm x 135mm x 90mm (7” x 5.31” x 3.54”)- Weight (oz): 920g (32.45oz) left speaker - 800g (28.22oz) right speaker |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine