IK Multimedia irig mic cast User Manual

IK Multimedia irig mic cast User Manual Manual pdf 8 page image

English8• Never use a MONO mini-jack to connect to the iRig MIC Cast headphone output; Always use a STEREOmini-jack.• The iRig MIC Cast headphone output duplicates the mobile device output. To hear your recording from thisoutput, you must use an app that supports real-time audio pass-through such as the IK Multimedia iRigRecorder or VocaLive apps.• iRig MIC Cast comes with an adjustable table stand that will conveniently hold your mobile device in placewhen recording a podcast. Adjust its rear leg for optimal orientation of the iRig MIC Cast and front camera (ifyou’re using it).• If you’re using a mobile device whose headphone mini-jack is located at the bottom, you need to position itupside down on the stand to allow iRig MIC Cast to be plugged in.• Remember that both iRig MIC Cast and the adjustable table support are precision devices that must behandled with care during use.TroubleshootingMy recording is too quiet.Set the sensitivity switch from LO to HI on the front of the microphone.My recording is distorted.Set the sensitivity switch from HI to LO on the front of the microphone.I can’t hear anything from the headphone output.Check that the app you’re using allows for audio-through from input to output.The recording appears distant or unfocused.The microphone is directional; so make sure that the front faceplate of the microphone is pointed directly at yourrecording source.WarrantyPlease visit:www.ikmultimedia.com/warrantyfor the complete warranty policy.Support and more infowww.ikmultimedia.com/support