A Drive (maintenance-free): DC motor with 1-level synchronous belt driveEnvironmental temp.: °C +5 to+40Environmental humidity: % 80Operating position: on fixed object, tension filler facing downMax. qty. of stirred water: ltr 10for viscosity: LVClamping chuck tension range: mm 0,5 -10Hollow shaft, internal dia.: mm 11Extension: mm 13x160longHousing: Al diecast, thermoplast. plasticDimensions excl. extension: mm (BxTxH) 80x190x175Weight with extension andclamping chuck: kg 2,8Speed deviations:Adjustment precision: % 10When loaded: % 0 load nmax= 1600 min-1 (nom.)% 100 load nmax= 1200 min-1 (nom.)Max. speed rpmR1342 Propeller stirrer 4fl 2 000R1381 Propeller stirrer 3fl 2 000R1382 Propeller stirrer 3fl 2 000R1389 Propeller stirrer 3fl PTFE 800R1352 Centrifugal stirrer 2 000R1311 Turbine stirrer 2 000R1312 Turbine stirrer 2 000R1335 Kneading stirrer 2 000R1330 Anchor stirrer PTFE 1 000Associated EU guidelinesEMV guidelines: 89/336/ECMachine guidelines: 89/392/ECConstruction in accordance with the following safety standards:EN 61 010-1 /VDE 411-1 EN 292-1, -2EN 50 082-1 EN 414EN 55 014-1 IEC 1010-1EN 60 555-2, -3 UL 3101-1EN 60 204-1 CAN/CSA C22.2 (1010-1)You have purchased an original IKA laboratory machine whichmeets the highest engineering and quality standards.In accordance with IKA guarantee conditions, the guarantee peri-od is 12 months. For claims under the guarantee please contactyour local dealer. You may also send the machine direct to ourworks, enclosing the delivery invoice and giving reasons for theclaim. You will be liable for freight costs.14 RW160995EUViscosity mPa · sVLV very low viscosity 0 .......... 100 water up tothin-flowing oilLV low viscosity 100....... 1000 thin-flowing oil up tothick-flowing oilMV medium viscosity 1000.. 10000 thick-flowing oil up tohoney at approx. 20 °C.HV high viscosity 10000 100000 honey at approx. 20 °Cup to printing inksPermitted IKA stirrer toolsAssociated standards and regulationsGuarantee