IKEA BEKANT Manual
Also see for BEKANT: Installation instructionManualManualManual
                                                        | |
Advice and instructions for BEKANT sit/stand desk.Sound level: lower than 55 dB(A)Height setting interval:EU-version: 64-125 cmNA-version: 57,4-122,4Maximum load: 70 kgTemperature interval at usage:+5 up to +40 degrees CTemperature interval at storage:-10 up to +50 degrees CHumidity:20% up to 80% at +30 degrees C.Every person who is responsible for thistable at installation or employment ofthe table in daily use or in service andrepair work should carefully read theseinstructions. Keep these instructions close toyour sit/stand table.Installation instructions— The table is assembled according toseparate assembly instructions.— Connect the cable from one leg to theother. Connect the hand control to oneof the leg and the power-supply to theother leg. The cables to the legs, handcontrol and power supply should beplaced in the accompanying net. Placethe electrical cables so that they do notget damaged, see assembly instruction.— Connect the electrical cable to awall socket.NB! The electrical cable must have fullmobility.— Insert the safety key in the socket onthe hand control.— The table is now ready for use. Themotors stop automatically when thetable reaches its lowest and highestposition respectively.Usage of the table— The table shall only be used as aworking table with the possibility tocontinuously adjust working heightbetween sitting and standing position.The table shall only be used indoors andin dry premises (office environment orsimilar).— The table must not be overloaded -maximum load is 70 kg. The motorsmay be run continuously for maximum1 minutes. Afterward, the motors muststand by for approx. 9 minutes beforethey can be used again.Follow these instructions whenadjusting table height:1. Insert the safety key in the socket onthe hand control.2. Make sure no objects are in the way ofthe table adjusting height freely.3. In order to run the table up/down, pressthe manoeuvre button with an arrowpointing up and down respectively.Safety regulations— When the table is run up/down, keepthe necessary safety distance to avoidthe risk to get squeezed between themoving table top and fixed objects in thesurrounding area.— When the table is run up/down theuser shall keep watch so that nobodyis injured or no object is damaged. Thetable top must not bump into a fixedobject so that the table is overturned.Always remove any office chair beforethe table is run up/down.— When the table is left unattended, thesafety key must be removed from thehand control and placed out of reach ofchildren.— The table tripod must not be altered orreconstructed in any way. In service andrepair work of the table, the electricalcable must always be disconnected fromthe wall socket.— Alterations to the control box areabsolutely forbidden!— The table must not be used as a hoistingdevice for persons.ENGLISH 4 |
Related manuals for IKEA BEKANT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine