IKEA DISKAD Manual

Also see for DISKAD: Manual Manual Instruction manual Manual Manual

11ENGLISHProduct informationProduct informationProduct information→ Fig. 1Familiarising yourself with your applianceFamiliarising yourself with your applianceFamiliarising yourself with your applianceApplianceYou can find an overview of the parts of your appliance here.→ Fig. 21Rating plate Rating plate with E number and FD number.The data you need for Customer Service.2Detergent dispenser Add detergent to the detergent dispenser.3Bottom basket Bottom basket4Dispenser for special salt Add special salt to the dispenser for special salt.5Lower spray arm The lower spray arm washes the tableware in the bottom basket.If the tableware has not been washed properly, clean the sprayarms.6Tablet collecting tray During the wash cycle tablets automatically fall out of the deter-gent dispenser into the tablet collecting tray where they can fullydissolve.7Top basket Top basket8Cutlery drawer Cutlery drawer9LED Interior lighting of the appliance.10Cutlery shelf Cutlery shelf11Upper spray arm The upper spray arm washes the tableware in the top basket.If the tableware has not been washed properly, clean the sprayarms.12Intake opening The intake opening is required for the Drying.13Blow opening The blow opening is required for the Drying.14Filter system Filter system15Dispenser for rinse aid Add rinse aid to the dispenser for rinse aid.FeaturesYou can find an overview of the possible features of your ap-pliance and how to use them here.These features depend on the model of your appliance.Adjusting top basket with side leversTo wash large items of tableware in the baskets, adjust theshelf position of the top basket.→ Fig. 3 - 4Reorganising cutlery drawerYou can fold down the side shelves and front prongs tomake more space for longer/wider items of cutlery.→ Fig. 5 - 6Folding down prongsIf you do not need the folding tines, fold them down.→ Fig. 7Before using for the first timeBefore using for the first timeBefore using for the first timePerforming the initial configurationOn initial start-up or after a reset to the factory settings, youwill need to make settings.Requirement: The appliance has been installed and connec-ted.1. Add special salt.2. Add rinse aid.3. Switch on the appliance.4. Setting the water softening system.5. Set the amount of rinse aid to be dispensed.6. Add detergent.7. Start the Programme with the highest cleaning temperat-ure without tableware.We recommend you clean the appliance without table-ware before using it for the first time to remove anymarks from water or other residues.Tip: You can change these settings and other Basic settingsat any time.To download the full document, visit www.ikea.com