IKEA ELDSLÅGA User Manual

Also see for ELDSLAGA: Manual Manual Manual User manual User manual

Contents

IKEA ELDSLÅGA User Manual Manual pdf 12 page image

ENGLISH 12Technical dataDimensionsWidth (mm) 730Height (mm) 40Length (mm) 510Voltage (V) 220 - 240The technical information are situated in therating plate on the bottom side of the appliance.InstallationAfter unpacking the hob, make sure that ithas not been damaged during transport. Inthe event of problems, contact the dealer oryour nearest After-sales Service.Technical information for the installer- This product can be embedded in aworktop 20 to 50 mm thick.- If there is no oven beneath the hob,insert a separator panel that has asurface at least equal to the openingin the work surface. This panel must bepositioned in no case less than 20 mmfrom the bottom of the hob.- Before installation, make sure that:- the local gas delivery conditions (natureand pressure) are compatible with thesettings of the hob (see the rating plateand injector table);- the outer surfaces of the furniture orappliances adjacent to the hob are heatresistant according to local regulations;- This appliance is not connected to afume exhaust device. It shall be installedin accordance with current installationregulations. Particular attention shallbe given to the relevant requirementregarding ventilation.- Combustion products are dischargedoutdoors through specific hoods or walland/or window mounted electrical fans.Gas connectionThis operation must be performed by aqualified technician.The gas supply system must comply withlocal regulations to the relavant gasstandard.- You can find specific local regulationsfor some countries in the paragraph“Reference to Local Regulations”. If noinformation concerning your Country isgiven, please ask details to a qualifiedtechnician.- The connection of the hob to the gaspipe network or gas cylinder must be